Installation

We install! Contact us for rates.
All parts and installation are covered by 1 year warranty.

in Sauna Rooms



Prefabricated modular Saunas

Prefabricated Saunas
Saunas made from pre-assembled modules.




 

Prefabricated Sauna (FPF) Specifications


Springs Sauna Company prefab saunas, outdoor saunas and sauna accessories.

This section is based on the products of Springs Sauna Company, which is located at:

705 South Institute Street
Colorado Springs, CO 80903
Tel: 719.475.1153 (direct)
877.728.6299 (toll-free)
Email:info@authenticsauna.com
Web Page: http://www.authenticsauna.com/

Springs Sauna Company provides prefabricated Modular, Freestanding saunas(FPF) and precut (FPC) packages in a variety of woods; including benches, door, heater, heater fence, headrest, backrest, trim and base, Super Dek sanitary removable flooring, and accessories.

Section 13052 - SAUNAS, Copyright 1998, The Architects Catalog, Inc.

PART 1  GENERAL

1.1 SECTION INCLUDES

  1. Prefabricated modular saunas with exclusive locking system.
  2. Insulated outdoor saunas.
  3. Sauna heaters.
  4. Sauna accessories.

1.2 RELATED SECTIONS

NOTE** Delete sections below not related to this project; and add other that are related.

  1. Section 03300 - Cast-In-Place Concrete: Flooring substrate.
  2. Section 09300 - Tile.
  3. Section 09650 - Resilient Flooring.
  4. Section 15150 - Sanitary Waste and Vent Piping: Floor drains.
  5. Section 16100 - Wiring Methods: Electrical service wiring.
  6. Section _____ - __________________________________.

1.3 SUBMITTALS

  1. Submit under provisions of Section 01300.
  2. Product Data: Manufacturer's descriptive literature for saunas and components specified in this section.
  3. Shop Drawings: Plan and elevations of sauna design, indicating construction details.
  4. Samples: Two samples, minimum size 4 inches wide by 8 inches long, of specified materials for wood paneling.
  5. Manufacturer's printed installation instructions for sauna, benches, and accessories.
  6. Operation and Maintenance Data: Sauna enclosure, heater, and control.
  7. Warranty documents: Issued and executed by manufacturer.

1.4 DELIVERY, STORAGE, AND HANDLING

  1. Store products of this section in manufacturer's unopened packaging until installation.
  2. Maintain dry, heated storage area for products of this section until installation of products.

1.5 WARRANTY

  1. Manufacturer's Warranty: One-year on room materials and workmanship when installed according to manufacturer's specifications and one-year on heater parts and Five-years on factory labor when heater is installed according to manufacturers wiring information, 5 years on factory labor.

PART 2  PRODUCTS

2.1 MANUFACTURERS

  1. Acceptable Manufacturer: 705 South Institute Street
    Colorado Springs, CO 80903
    Tel: 719.475.1153 (direct)
    877.728.6299 (toll-free)
    Email:info@authenticsauna.com
    Web Page: http://www.authenticsauna.com/
  2. Substitutions:   Not permitted.
  3. Provide all saunas and accessories from a single manufacturer.

2.2 MANUFACTURED UNITS

NOTE: Retain one of the following paragraphs, completing model number designation and size.  Select standard sizes seating up to 12 people as shown in manufacturer's literature and website.  Coordinate with SECTION INCLUDES Article in Part 1 of this section. 

NOTE: Prefab saunas must be installed on a level hard-surfaced waterproof floor; electrical conduit is sealed within the walls.  Control box (when necessary) is pre-mounted.  Contactors (when necessary) can be pre-mounted or installed separate from the sauna. 

NOTE: Insulated outdoor saunas require a roof package which includes: wood plates, prefab rafters, nailers, facing, metal flashing, cedar shingles, ridge cap, and nails.

  1. Prefabricated Modular Saunas:  "FPF _____.
    1. Size:  ____________________.
  2. Prefabricated 5-Sided Saunas:  "FPF66-5S."
    1. Size: Exterior Dimensions 6' 0" x 6' 0" x 7' 0"
  3. Insulated Outdoor Saunas.
    1. Size:  ____________________.

2.3 COMPONENTS

NOTE**   Retain or edit one of the following paragraphs;    coordinate with RELATED SECTIONS Article in Part 1 of this section.

  1. Sub-Floor:  Specified in Section 03300.
  2. Sub-Floor:  Specified in Section 09300.
  3. Sub-Floor:  Specified in Section 09650
  4. Wall and Ceiling Framing:  2 inch by 2 inch Oregon Douglas Fir.
  5. Wall and Ceiling Insulation:  R-11 fiberglass batt, foil faced.
  6. Wall and Ceiling Vapor Barrier:  Type C Building Foil.
  7. Interior Wall and Ceiling Finish:  Board paneling of nominal 1 inch by 4 inches kiln-dried softwood lumber; small V-joint tongue-and-groove.

    NOTE**     Select one of the following four wood species.

    1. Species:  Western Red Cedar, clear.
    2. Species:  California Redwood, clear, vertical grain.
    3. Species:  Alaska Yellow Cedar, clear.
    4. Species:  Western Hemlock, clear.

NOTE**   Western Red Cedar has the most color variation, a refreshing aroma, and is dry-rot resistant; as the softest wood, it is least hot to sit on or lean against. California Redwood is the most fire-resistant, dry rot resistant, termite resistant, and does not warp. Alaska Yellow Cedar is an exclusive white wood, has a pungent aroma, and is silky to the touch. Western Hemlock is excellent for people who have wood allergies or are chemically sensitive, since it has no aroma and no resins.

NOTE**   Retain one or two of the following paragraphs. The first is standard the second is an option.

  1. Exterior Siding:  11/32 inch ruff-sawn mahogany plywood.
  2. Optional Exterior Siding:  1/2 inch by 4 inch tongue-and-groove Western Red Cedar.(Can be applied to any or all exterior walls)
  3. Flooring:  "Super Dek" flooring squares for walking areas over concrete, tile, or vinyl; removable, washable, sanitary, non-skid, synthetic material.
  4. Prehung Doors and Frames:
    1. Door Rails: One-piece vertical grain Oregon Douglas Fir, machined for integral stop.

NOTE** Retain one of the following subparagraphs. Standard door size is 2 feet by 6 feet 2 3/4 inches. 3 foot doors are not ADA compliant due to 2 x 4 base- requires ramp for wheelchair accessibility.

      1. Door size:  2 feet wide by 6 feet 2 3/4 inches.
      2. Door size:  3 feet wide by 6 feet 2 3/4 inches.
    1. Glass:Hermetically-sealed double glass, tempered.
    2. Casing, Jamb, and Threshold:  Vertical grain Redwood, S4S, maximum 11 percent moisture content, jamb machined for integral stop.
    3. Hinges:  Three 4-inch by 4-inch butts.
    4. Ball Catch:  Ives MP347B3.
    5. Door Pulls:  Two wood pulls 080 each door.

NOTE** It will be necessary to ascertain the elevation above sea level for the sauna when ordering.

  1. Sauna Heaters: Three-wall pressed metal construction, stainless steel heating elements, large rock capacity, direct rock contact with heating elements, free air flow; UL tested and listed.

NOTE** Select heater type and model from the Heater Chart located in General Specifications.

  1. Heater Fence: S4S, kiln-dried clear vertical grain, 2 by 2 (1-5/8 inches by 1-5/8 inches). 16 inchby 26 inch wall model, 30 inch by 30 inch floor model.
  2. Benches: S4S, kiln-dried clear vertical grain, 2 by 2 (1-5/8 inches by 1-5/8 inches) tops with 1/2 inch nominal spacing; eased edges to eliminate sharp angles.
    1. Facings:  2 by 4 (1-5/8 inches by 3-1/2 inches) of same material as tops; eased edges.
    2. Trim: Wood species to match room paneling.
  3. Fasteners: Stainless and Galvanized, applied from the bottom to eliminate exposed metal; exposed nails countersunk and filled.
  4. Vents: 4 inches by 10 inches. White baked enamel.
    1. Lower:  Neatly cut into room base.
    2. Upper:  Neatly cut into upper wall.
  5. Light:  Vapor-proof, wall-mounted, Progress P5511, satin finish cast aluminum, 75 watts.

2.4    ACCESSORIES

  1. Standard Accessories:
    1. 100N or B; Wood bucket, 1 gallon.
    2. 100L; Plastic bucket liner.
    3. 106/40; Wood dipper, 16 inches.
    4. 079; Tapered headrest.
    5. 3444; Redwood thermometer.
    6. PBS; Plexiglass bathing sign.
    7. P5511; Vapor-proof wall light.
    8. SD12; Interlocking Super Dek flooring, 12 inches square.
  2. Optional Accessories:
    1. 442F; Cedar towel hanger.
    2. 5499; Chrome/glass thermometer/hygrometer, 7-inch diameter.
    3. 5498; Chrome/glass thermometer/hygrometer, 5-inch diameter.
    4. 5355; Chrome/glass thermometer, 4-inch diameter.
    5. 4355; Chrome/glass hygrometer, 4-inch diameter.
    6. 293A; Wood thermometer/hygrometer.
    7. 215K; Birch bark sauna sign, 3-1/2 inches by 10 inches.
    8. 210K; Sauna sand timer.
    9. 490-128; Set of two brushes.
    10. 101N; Wood bucket, 1.84 gallons.
    11. 3433; Pine "Sauna" door handle.
    12. 3434; Plain door handle.
    13. 120; Door handle with towel hook.
    14. 3465; Light copper bucket.
    15. 3455; Light copper dipper.
    16. 106/50; Wood dipper, 19 inches.
    17. 108N; Wood pail, 2 gallons.

PART 3 EXECUTION

3.1 EXAMINATION

  1. Verify that electrical services are of correct type and in correct locations.
  2. Verify that construction activities affecting work of this section are correct and complete.
  3. Examine walls, floors, and ceiling for suitable conditions where sauna is to be installed.
    1. Submit written notification if such conditions are unacceptable.
    2. Do not proceed with installation until unsatisfactory conditions have been corrected.

3.2 INSTALLATION

  1. Install sauna level and plumb in accordance with manufacturer's printed installation instructions.
  2. Connection of heater, lighting, and control to electrical service is specified in Finlandia Wiring Instructions.

3.3    CLEANING

  1. Clean and restore soiled surfaces prior to acceptance.

3.4 PROTECTION OF INSTALLED PRODUCTS

  1. Protect sauna and components from damage to finishes and operation until Substantial Completion.